The Audio Garage

Moblie, Performance, Electronics

5257 51st Ave S., Fargo,ND
  
Contact Us: (701) 353-7266
  • Services
    • Accessories
      • Grille Guard and Truck Bumpers
      • Lighting
      • Paint Protection
      • Running Boards
      • UTV/SxS Accessories
      • Tonneau Covers
      • Truck Accessories
      • WeatherTech
      • Wheels and Tires
      • Window Tinting
    • Convenience
      • Auto Starts
        • Remote Car Starter Models
      • Backup Cameras
      • Blind Spot Sensor Systems
      • Driver Safety Products
      • Parking Sensor Systems
      • Security
    • Electronics
      • Classic Car Installation
      • Custom Fabrication
      • Laser and Radar Detector Systems
      • Marine Audio
      • Mobile Audio
      • Mobile Video
      • Motorcycle Audio
  • Gallery
  • Reviews
  • About Us
    • Why Choose Us
    • Meet The Team
    • Hours and Directions
  • Financing/Leasing Options
    • BrandSource
    • Acima
    • Progressive Leasing
  • Contact Us
You Are Here: The Audio Garage » ARTICLES » Shining a Light on Headlight Beam Patterns: What You Need to Know

Shining a Light on Headlight Beam Patterns: What You Need to Know

February 16, 2025 By BestCarAudio.com Leave a Comment

Beam Pattern

Every fall, car stereo and automotive accessory shops install thousands of lighting upgrades. These days, the most common upgrade is a set of LED headlight bulbs that fit into the stock light locations. While seemingly simple, the resulting beam pattern can be negatively affected if the chosen bulbs are not designed specifically for the lens or projector application. Let’s take a close look at understanding headlight beam patterns.

What Is a Headlight Beam Pattern?

Let’s kick this off with a bit of a definition. A beam pattern describes how the light from the headlight assembly illuminates the road. A lot of science goes into designing the reflector and lens in a headlight to focus the light energy where it does the most good. Of equal importance, headlights are designed to minimize blinding oncoming drivers. If an approaching driver can’t see correctly because your headlights aren’t aimed or functioning properly, everyone on the road is at risk. Crazy, bright headlights that blind everyone aren’t just dangerous for other drivers; they likely don’t work well at long distances. This reduces your safety.

Beam Pattern

Reputable aftermarket lighting companies like Baja Designs offer clearly defined beam patterns from their upgrades.

Off-Road Versus On-Road Lighting

In an off-road application, the driver wants as much light coverage as possible. If the trees are lit up, that isn’t a significant problem. However, on the road, we need to control where all the light from the vehicle goes. The issue with this light is that the beam is still directed at the oncoming driver’s eyes. This is incredibly dangerous as it prevents them from seeing any obstacles in front of them, including your vehicle, the road, or animals.

Beam Pattern

Side-view of a typical cone-shaped beam pattern from an off-road spotlight.

Beam Pattern

Overhead view of a typical cone-shaped beam pattern from an off-road spotlight.

The solution might be to angle the lights down so the top of the beam is below horizontal. The problem with this method is that the hot spot in the middle of the light is no longer way out in front of the vehicle. Most of the light will illuminate an area about 50 feet away. We don’t need to see this part of the road as much as we need to see 100 feet and beyond. Further, with the foreground so bright, the iris in our eyes will close to reduce the total light we see. This reduces how much we can see objects in the shadows or long distances.

Beam Pattern

Aiming the lighting down so the top of the beam is below horizontal will help reduce glare.

Beam Pattern

Lighting aimed too low will illuminate the foreground too much, reducing visibility at long distances.

Proper Automotive Headlight Systems

Many new cars and trucks use LED projector headlights; although some models may use reflector-type headlights, HID lights, or halogen bulbs. In the case of projector light assemblies, a cut-off feature assists in creating a good beam pattern. The goal of the lighting system is to illuminate the road as far as possible without making the foreground too bright. This requires a well-focused hot spot in the middle of the light and a way to prevent oncoming drivers from being blinded.

Beam Pattern

A metal shutter is placed in the headlight assembly to prevent oncoming drivers from being blinded.

Looking at the image closely, you’ll see a metal plate in the middle of the light assembly. The plate has a notch in it. That plate is oriented so it bisects the hot spot of the light beam. If the vehicle is pointed at a wall, you will see the step down on the left side of the light and a hot spot in the middle of that step.

Beam Pattern

A photo of the headlight beam pattern from a new SUV with LED projector headlights.

Asymmetric Low Beam Pattern

The step in the shutter reduces the light that shines on the left side of the road. This allows the lane in front of you to be well-illuminated while reducing glare for oncoming drivers. This is called an Asymmetric Low Beam Pattern. Here’s an aerial image of the beam pattern from the SUV to show the effect on the ground.

Beam Pattern

An aerial photo of the beam pattern produced by the headlights illuminating the fence in the above image.

If you look closely at the pattern produced by the headlights, you can see a beam of light extending almost off the image’s right side. This light is in line with the vehicle’s direction of travel and will light the road far off into the distance.

Beam Pattern

This second photo of the beam pattern further accentuates how light is focused towards the right side of the road.

What to Know When Upgrading Headlights

If you plan on upgrading the lighting on your car, truck, or SUV, it’s paramount that the changes you make don’t negatively affect the beam pattern. First, the hot spot should remain in the center and not dramatically brighten the foreground. The cutoff must remain sharp so as not to blind oncoming drivers. Technically, any bulbs you install should comply with FMVSS and be marked accordingly to be legal for on-road use.

Something is wrong if the lights don’t seem as bright or there are streaks of light pointing off to the side or upward. Have the shop reinstall the original bulbs until you find a perfect solution.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Lighting, RESOURCE LIBRARY

About BestCarAudio.com

BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Audio Garage Inc BBB Business Review

Buy a Gift Card!

Securely purchase an Audio Garage Gift Card with PayPal or any major credit card.

Search our site with any combination of CATEGORIES, TAGS, or KEYWORDS

  • Category

  • Tags

  • Sort Order

  • Keyword

  • » Reset

We’re Certified!

MECP Certified Installers

Certified M.E.S.A Dealer

Certified M.E.S.A Dealer

About Us

About Us

The Audio Garage was a dream put into motion by Nick Paulson and his brother Zac in 2004. What started out as a hobby, working out of a small garage, … [Read More...]

Why Choose Us?

Why Choose Us

The Audio Garage is a different kind of retailer. Lots of companies talk about putting the client first, but for us, … [Read More...]

TRUCK ACCESSORIES

Loading... Loading...
Truck Accessories

Truck Accessories

For many people, trucks are a way of life. Here at the Audio Garage, we understand truck owners. Whether you use your … [Read More...]

Directions


Get Directions to The Audio Garage

Address

The Audio Garage
5257 51st Avenue South
Fargo, ND 58104
Phone: 701-353-7266
Email: info@theaudiogarage.com
  • Facebook

Store Hours

Monday9:00 AM - 6:00 PM
Tuesday9:00 AM - 6:00 PM
Wednesday9:00 AM - 6:00 PM
Thursday9:00 AM - 6:00 PM
Friday9:00 AM - 6:00 PM

We are closed on Saturday and Sunday.

Copyright © 2025 The Audio Garage · Privacy Policy · Website by 1sixty8 media, inc. · Log in